Penguin Water Chiller – 1-1/2 HP

Description

• 15,000 BTU/hr  
• 61 dBA
• 26.50″ W x 23.75″ D x 18″ H
• 96 Pounds
• 1,270 Watts / 11 Amps

This chiller is one to consider if you are building a custom cold plunge that will hold 400 to 600 gallons. Please email or call to discuss details about sizing, pumps, and plumbing recommendations.

All Penguin Chillers

• 1″ NPT inlet/outlet ports (female threaded PVC)
• Titanium Heat Exchanger = Reef Tank Safe
• Recommended operating range 40°F to 100°F
• Water Temperature Under Ideal Conditions: 36˚F – 39˚F
• Water Temperature Under Less than Ideal Conditions: 40˚F – 44˚F
• 6′ Power Cord
• 110 – 120 Volts /
• 1-Year Product Warranty
• Proudly made in the USA

Penguin chillers plug into a standard 120v outlet.

Shipping is included to all lower 48 states. Please call for Alaska, Hawaii, Canada or Mexico.

Penguin water chillers come with a titanium heat exchanger, which prevents copper from coming into contact with your water. Because toxic levels of copper can build up in water being used for long periods of time, copper heat exchangers aren’t recommended.

All chillers have a built-in flow switch to disable the chiller in case of a pump failure.

Digital Controller: The built-in controller constantly monitors your system’s incoming water temperature; therefore, water flow is needed at all times for it to read current temperatures successfully. When your system’s water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.

Pump: A separate pump is required. Which pump you get depends on the volume of water in your cold plunge and how many feet of plumbing you have. Danner Mag-drive pumps are recommended because they have the correct pressure (psi). Available flow rates are from 500 gph – 1800 gph. Other pumps may be acceptable for use however they often apply less than 10 psi to the chiller. If you’re using a different pool/spa pump or any other pump rated in horsepower, please talk with our tech support first.

Sizing Your Chiller
When choosing the best size chiller for your cold plunge, there are several variables to keep in mind. The best practice is to design for the “worst case scenario” and choose the next stronger unit if in doubt.

• Volume of water
• Desired water temperature
• Ambient temperature (average, high, and low)
• Ambient humidity
• Will the plunge/chiller be placed indoors or outside
• Amount of direct sun exposure
• Tank/tub material
• Amount of insulation
• Type of plumbing
• Length of plumbing
• Number, frequency, and duration of people using the cold plunge

Example:

If you live in California on a hot day, it might reach the high 90s but drop into the 60F range at night. With the low humidity, a 1/2 HP chiller would be fine.

In Central Texas, if it is in the 90F range, it might only drop to 80F at night. With the high humidity, a 1 HP chiller would perform better.

Condensation
If you live in a hot, humid climate, plan for condensation on the floor area beneath the plumbing, pump, and filter.

Outdoor Use
Standard Penguin Chillers are not intended for outdoor use. If used outdoors, the case and interior components can be damaged by ambient heat, cold, rain, and humidity. If you want a chiller rated for outdoor use, consider the Cold Therapy Chiller or a Commercial Chiller.

Additional Items
The following items will be needed to set up a chiller-based cold plunge:

• pump
• sediment filter
• tubing/pipes
• fittings/connectors
• tub/container

Electrical RequirementsThe 1-1/2 HP chiller draws 11 amps and works on a standard 120v outlet. However, it is best to have it on a dedicated circuit.